Uplink (Wan Side) Configuration; Wan Settings - 4IPNET WHG315 User Manual

3.2. Uplink (WAN side) Configuration

3.2.1 WAN Settings

Configuration Path:
The WAN port supports four connection configurations Static, Dynamic,
PPPoE and PPTP. These connection types are adequate enough to support
most ISP. The Physical Mode drop-down list allows administrators to choose
the speed and duplex of the WAN connection. When Auto-Negotiation is On,
the System chooses the highest performance transmission mode
(speed/duplex/flow control) that both the system and the device connected to
the interface support.
Depending on ISP's interfacing device the WAN port is connecting, you need
to select the connection type applicable to you. For example, if your ISP is
Cable modem issuing Dynamic address, then you would select Dynamic
connection.
Static: Manually specifying the IP address of the WAN Port. The fields with
red asterisks are required to be filled in.
Main Menu >> System >> WAN
31
WHG Controller / HSG Gateway
User's Manual
ENGLISH