Wan - 4IPNET WHG315 User Manual


System Name: This is a mnemonic name you can give to the controller. Once configured, it will
show on the web browser's frame.

Contact Information: This is the email, cell phone, or other means of contact which will be
displayed on the web browser of the client in the event of internet disconnection.

HTTPS Certificate: Your own network certificate may be uploaded and selected here as site
safety verification.

User HTTPS Login: Presents the option to allow end users authenticated with HTTPS for
encrypted content transfer. The 'Secure' option supports only "High" encryption cipher suites.

Internal Domain Name: A self designated domain name. Ideal for accessing the Controller
instead of remembering the IP address of the LAN interfaces. Certificate's name may also be
used.

Portal URL: The specification of a desired landing page may be configured here. When
enabled, the administrator can choose to set the URL of an opened browser after users' initial
login.

User Log Access IP Address: The reserved IP address of the administrator may be entered
here. Once configured, user logs can only be accessed via the entered IP.

Pre-Login Page: A HTML customizable pre-portal page before landing the Login Page.

UAM Filter: The Universal Access Method Filter drops non-browser http requests from user
agents before authentication to prevent system overloading from excessive traffic.

Management IP Address List: This configuration button allows the network administrator to
enter a selection of reserved IP addresses/ range that are authorized to see the Web
Management Interface. The remote console interface is disabled by default. You may enable
remote access from this page.

SNMP: Presents an option to enable or disabled system info retrieval via SNMP protocol.
Administrators can choose to assign specific port to transmit SNMP trap messages. Detailed
thresholds such as CPU Usage, Memory Usage, DHCP Scope, and Heart Beat Period may be
configured.

Suspend Warning Message: A field for administrator to enter the message to users when a
Service Zone's service is temporarily suspended

Time: This section presents manual system time configuration option or automatic time
synchronization by specifying external NTP servers.

2) WAN


Physical Mode: Select the mode (Auto/1000Mbps Full/100Mbps Full/100Mbps Half) based on
WHG Controller / HSG Gateway
261
User's Manual
ENGLISH