Ddns; Client Mobility - 4IPNET WHG315 User Manual

 Garbage Collection Timer: Specify the time in seconds before erasing invalid route from the routing
table.

8) DDNS

Before activating this function, you must have your Dynamic DNS hostname registered with a Dynamic DNS
provider. WHG CONTROLLER supports DNS function to create aliases from the dynamic IP address for the WAN
port to a static domain name, allowing the administrator to easily access WHG Controller's WAN. If the dynamic
DHCP is activated at the WAN port, it will update the IP address of the DNS server periodically. These settings will
become effective immediately after clicking Apply.

DDNS: Enable or disable this function.

Provider: Select the DNS provider.

Host name: The IP address/domain name of the WAN port.

Username/E-mail: The register ID (username or e-mail) for the DNS provider.

Password/Key: The register password for the DNS provider.

9) Client Mobility


IP PNP: Enable this feature so devices with static IP, DNS, and Gateways can obtain internet access from
the controller.

Cross Gateway Roaming: Configure this gateway to Master or Slave. In Master mode, you may also need
to input the Slave IP and Secret Key. In Slave Mode, input Master IP and Key.
Master Node: While configure Master Node, one master could active up to 15 Slave node setting.

WHG Controller / HSG Gateway
338
User's Manual
ENGLISH