Downlink (Lan Side) Vlan Option; Port-Based Service Zone - 4IPNET WHG315 User Manual

3.3. Downlink (LAN side) VLAN option

The Downlink of WHG Controller is basically your managed network deployed for
service. There are two types of deployment mode for networks attached to the LAN
ports of the WHG Controller: Port-Based mode and Tag-Based mode.
NOTE
1. If HA feature is in Enabled status, LAN1 will be transformed into a dedicated
HA port and will not be able to service any Service Zone.
Configuration Path:
3.3.1.

Port-Based Service Zone

Port-Based mode operates with the principle that each physical LAN port can
be mapped to an enabled Service Zone or disabled from providing service.
Operating under port based mode therefore means the maximum amount of
Service Zones available to actually provide service is determined by the
number of LAN ports on the Controller.
Trusted Port: When a LAN port is selected here, clients under this port will
not require authentication regardless of the corresponding Service Zone
Main Menu >> System >> LAN Ports
WHG Controller / HSG Gateway
39
User's Manual
ENGLISH