Ap Auto Discovery And Configuration Using Capwap - 4IPNET WHG315 User Manual

User's Manual
WHG Controller / HSG Gateway ENGLISH
Up to 3 Templates are available and all functions configurable for wireless on the
access point can be configured from the template.
General Settings on the Access Point include basic wireless settings such as the
Band, Channel, Transmit Power, Transmit Rates and etc. VAP Settings allows the
administrator to enable/disable a VAP, designate an ESSID, and assign VLAN ID if
needed. Configure Security Settings, such as WEP, 802.1X, WPA-Personal, WPA-
Enterprise if needed. Advanced Wireless Settings allows the administrator to
fine-tune performance and efficiency on the Access Points to maintain good wireless
connection quality for associated clients.

7.3.4 AP auto Discovery and Configuration using CAPWAP

CAPWAP is a standard interoperable protocol that enables a WHG Controller to
manage a collection of wireless access points.
Configuration Steps:
1. On the 4ipnet controller: Enable CAPWAP from Main Menu >> Access Points >>
Wide Area AP Management >> CAPWAP
101