Dual Uplink - 4IPNET WHG315 User Manual

Dynamic: It is only applicable for a network environment where the DHCP
server is available on the upstream network. Click the Renew button to get
an IP address automatically.
PPPoE: If your ISP provides PPPoE Dialup connection, then the ISP will issue
you an account with a password. You would need to enter the account
credential in the WAN configuration page for dialing up to the ISP.
PPTP: Although not a popular method, PPTP protocol for dialup connections is
adapted by some ISPs (in European Countries). Your PPTP ISP will issue you
an account with a password as well as the PPTP server address.
NOTE
1. When in doubt, please consult your ISP provider regarding details of your
subscribed uplink service.
3.2.2.

Dual Uplink

WHG Controllers are designed with 2 WAN ports for load balancing and
failover support. WAN2 can be enabled for service once WAN1 connection is
established.
If you would like to use a second Internet feed, select one of the three
connection types applicable to WAN2 port: Static, Dynamic, and PPPoE.
The Physical Mode of the WAN2 port can be selected.
WHG Controller / HSG Gateway
32
User's Manual
ENGLISH