System Overview; Front Panel - 4IPNET HSG1250 Quick Installaion Manual

System Overview

Front Panel

1 Quick-Print
button
2 WES button
3 Power LED
4 Status LED
5 Wireless LED
6 WAN LED
7 LAN1 - 4 LED
8 USB LED
9 WES LED
Copyright © 4IPNET, INC. All rights reserved.
Press this button to create an on-demand account from billing plan 1 and print
out through console. (Need to work with a POS printer connected via console
port.)
Press and hold over 5 seconds to initiate Master WES process. Press and
release to initiate Slave WES process.
On indicates power on.
On indicates the system ready.
On indicates wireless network interface is ready for service.
On indicates that WAN uplink connected.
Indicates the connection status of each LAN.
Indicates the status of USB connection. USB port reserved for future use.
For indicating WDS connection status.
Master (Press for more
than 3 seconds)
LED (Green) OFF and
WES Start
then BLINKING SLOWLY
BLINKING NORMALLY
WES Negotiate
(Green)
WES Timeout LED (Green) ON
WES Success LED (Red) ON
WES Fail LED (Green) ON
2
Quick Installation Guide
HSG260 Wireless Hotspot Gateway ENGLISH
Slave (Press once and
then release right away)
LED (Red) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Red)
LED (Red) ON
LED (Green) ON
LED (Red) ON