Waste Ink Pad / Waste Ink Tube Left/Right - Epson Stylus Photo R2000s Series Service Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series

4.4.8 Waste Ink Pad / Waste Ink Tube Left/Right

1. Remove the Printer Mechanism.
Mechanism (p.98))
2. Remove the C.B.P. M3 x 8 screw that secures the Ink Tube Holder, and remove
the Ink Tube Holder.
3. Remove the 12 Waste Ink Pads from the Lower Housing.
4. Remove the Waste Ink Tube Left/Right from the Lower Housing.
Figure 4-101. Removing the Waste Ink Pad
Disassembly And Assembly
(Refer to 4.4.4 Lower Housing / Printer
Waste Ink Pad
Ink Tube Holder
4) C.B.P. M3x8
(6±1 kgf.cm)
Disassembling the Printer Mechanism

Check the positions and the routing of the upper and lower
Waste Ink Tubes.
0 digit side : Lower side
130 digit side : Upper side
Waste Ink Tubes
10±1mm
130 Digit Side
Figure 4-102. Positions of Waste Ink Tubes
A D J U S T M E N T After replacing or removing the Waste Ink Pads, always make the
R E Q U I R E D
required adjustments referring to the following.
• "Chapter 5
Adjustment
Revision I
Waste Ink Tubes
10±1mm
0 Digit Side
(p.139)"
112