Saving data and printing
Before switching off the instrument, dimensions, measurements, diagnosis
and all settings can be saved for analysis, future use or record purposes in the
instrument's non-volatile memory. Full file names with up to 32 alphanumeric
characters are possible.
The length of the file name is limited depending on whether upper or lower
case letters have been used.
To save a file
The current measurement file can be saved at any time. To save the file, press
then use the navigation keys to highlight the 'File' icon.
MENU
to confirm selection. The "File menu" screen appears.
Press
ENTER
Note
Horizontal shaft alignment
Saving data and printing
81