Fluke 830 User Manual page 41

Default settings
To open the "Default settings" screen, use the navigation keys and highlight the
'Default settings' icon while in the configuration menu, then confirm selection by
. The screen is used to set specific default parameters. Use
pressing
ENTER
/ to cycle through the parameters. The default changes are effective upon
restart or if a new file is created.
● Default RPM – used to set the required default rpm. Highlight 'Default RPM'
then use the data entry keys to enter the required default rpm. Confirm entry
by pressing /
ENTER BACK
● Reference diameter – used to set the required reference diameter. Highlight
'Ref. diameter' then use the data entry keys to enter the required reference
diameter. Confirm entry by pressing
started will then automatically be preconfigured with this RPM value already
entered. Every new alignment file started will then automatically be configured
with this coupling diameter value already entered.
.
/
ENTER BACK
Configuration and data management
. Every new alignment file
Default settings
33