Figure 7-6. Machine Dimensions To Be Entered; Figure 7-7. Distance Marking On The Sensor And Prism - Fluke 830 User Manual

Horizontal shaft alignment
Enter dimensions
Enter dimensions as shown in Figure 7-6:
1
2
3
4
5

Figure 7-6. Machine dimensions to be entered

Sensor to prism
1
This is the distance between the markings on top of the sensor and the prism
(refer to Figure 7-7). The dimension is determined by measuring the distance
between the center of the prism and the sensor support posts.
Distance marking
55

Figure 7-7. Distance marking on the sensor and prism