Fluke 830 User Manual page 136

830
Users Manual
5. When the hint above appears, press and hold down
reboots. The display goes dark.
6. The update process will start automatically (wait up to 10 seconds). The
system beeps and the right LED flashes as the process begins.
Do NOT turn off the device or remove the memory stick during the entire up-
date process, which takes up to 5 minutes.
7. Just before the firmware update process comes to an end, the screen below
appears.
8. After the flashing process is completed, a hint indicating that the flashing
process for the new firmware has been carried out correctly appears.
128
until the device
Note