830
Users Manual
The "Measurement options" screen is accessible only when all necessary
machine dimensions, in the currently opened measurement file, have been
entered.
Using the navigation keys, highlight the required measurement mode, and then
to confirm selection.
press
ENTER
In the above case, the selected measurement mode is the 'Clock' mode which
is the default measurement mode for vertical mounted machines (described in
chapter 9 'Vertical flanged machines'.
Extending the measurement range
Gross misalignment of shafts or angular misalignment over large distances can
cause the laser beam to miss the detector surface during measurement. When
this happens, 'Laser End' appears on the display screen and the Product's
'extend' function can be used.
1. When measuring and 'Laser End' message appears, rotate the shafts
backwards until the laser beam re-enters the measurement range. The
message 'Laser READY' reappears on the display.
102
Note