Vertical Flanged Machines; Typical Configuration; Figure 9-1. Typical Vertical Machine Configuration - Fluke 830 User Manual

9. Vertical flanged machines

Typical configuration

Figure 9-1. Typical vertical machine configuration

Figure 9-1 shows a typical vertical machine arrangement with one machine
mounted on top of the other using a bolted flange.
In flange-mounted machines, alignment corrections are made directly at the
flange.
Angularity is corrected by inserting or removing shims between the flanges.
The Product calculates the shimming thickness for each flange bolt. Offset is
corrected by positioning the flange laterally.
Typical vertical machine
arrangement comprised
of one machine mounted
on top of the other with a
bolted flange.
Vertical flanged machines
Typical configuration
107