Power Supply - Fluke 830 User Manual

Power supply

The Product is powered using a non-removable 7.4 V 2.6 Ah Lithium-ion polymer
rechargeable battery, which is to be charged via the USB port only using the
universal adapter/charger. The rechargeable battery allows operation of up to 17
hours (33% active measurement, 33% computation, 33% 'sleep' mode).
The rechargeable battery may also be used to power the sensor when
measurement is carried using the sensor cable and not the wireless module.
The rechargeable battery is housed in a compartment that is held closed
using a special screw and must never be tampered with. When the
battery can no longer hold charge, the Product must be sent back for
service.
Charging the battery
Charging the non-removable rechargeable battery is possible only via the
Product.
To charge the rechargeable battery, connect the adapter/charger to the Product
USB port (grey) and to the mains supply (see Figure 4-2).
Caution
Note
Overview
Power supply
15