Fluke 830 User Manual page 83

Horizontal shaft alignment
Live Move
Start live horizontal Move
.
While in results screen, press or The "Main menu" window opens.
ENTER MENU
to confirm
Use the navigation keys and highlight the 'Move' icon then press
ENTER
selection. The screen used to position the sensor in any of the four appropriate
45° positions appears.
Turn shafts to any 45° position
Rotate the shaft to any 45° position (this could be either the 10:30, 1:30, 4:30 or
7:30 o'clock position as viewed towards sensor).
If the laser beam has been centered, rotating the shaft to an angular position
corresponding to any of the four green sectors prompts the Move direction dialog
window.
75