Fluke 830 User Manual page 133

After selecting the location of the approved memory stick by clicking 'Browse',
start file extraction by clicking 'Extract'.
Carrying out the firmware update
The firmware update is carried out using the memory stick and the 'short' USB
cable. The actual update does not require a PC.
Before starting the update verify that your memory stick has the following files on
it.
The displayed files and folder are viewed by expanding the folder 'FLUKE830'.
The downloaded version is indicated by the prefix v1_xx_yyyy, where 1_xx
represents the firmware version and yyyy the build number.
Note
Carrying out the firmware update
Appendix
125