Figure 7-10. Tolerance Bar; Table 7-2. Fluke 830 Alignment Condition Leds - Fluke 830 User Manual

830
Users Manual
If the coupling diagnosis show that misalignment exceeds the tolerance, then the
machine must be realigned by shimming vertically and repositioning the machine
horizontally.
Tolerances
The color-coded tolerance bars on the results screen indicate the degree to
which the measured alignment condition meets specified tolerances. The marking
on the tolerance bar shows the measured alignment condition. This ranges from
excellent tolerance to worse tolerance.
The Product's alignment condition LED provides additional information on the
tolerance status.

Table 7-2. FLUKE 830 alignment condition LEDs

Tolerance
Excellent tolerance
Acceptable tolerance
Out-of-tolerance
Grossly misaligned
72
Excellent tolerance
Acceptable tolerance
Out-of-tolerance
Grossly misaligned

Figure 7-10. Tolerance bar

Tolerance bar LED color
Green
Yellow
Orange
Red
830
LASER ALIGNMENT TOOL
SETUP MEASURE DIAGNOSE MENU
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
CLEAR ENTER
space
-
+ 0 . / .
BACK