Getting Started; Set Up The Product; Enter Dimensions; Figure 6-1. Mounting Components Across The Coupling - Fluke 830 User Manual

6. Getting started

Set up the product

1. Prepare the machines by making certain that they are locked out, tagged out
and all necessary safety precautions have been taken.
2. Mount brackets, wireless module, sensor and prism. The sensor connected
to the wireless module should be mounted to the left machine (usually
stationary).
3. Switch the product on by pressing
lights up followed by a beep. Shortly afterwards, the "Setup" screen appears.

Enter dimensions

Left
machine
(stationary)
Product FLUKE 830

Figure 6-1. Mounting components across the coupling

and holding down briefly. The right LED
Sensor
Prism
Right machine
movable
Getting started
Set-up
39