Fluke 830 User Manual page 134

830
Users Manual
1. Press to switch the Product on. Wait for the "Setup" screen to appear.
Before proceeding with the update ensure that the indicated nominal capacity
of the battery is greater than 50%. If this is not the case, recharge the battery
to full capacity first.
To check battery capacity proceed as follows:
● Press
.
MENU
● When in the "Main menu" screen use the navigation keys and highlight the
'Config' icon. Confirm selection by pressing
● After accessing the "Configuration menu" screen use the navigation
keys and highlight the 'Device settings' icon then press
selection. The actual battery capacity is indicated in the screen that
appears.
2. Attach the 'short' USB cable to the Product's grey USB port.
3. Insert the approved memory stick into the 'short' USB cable.
126
Note
.
ENTER
ENTER
to confirm