830
Users Manual
Take measurements
It is important to note which measurement mode is best suited for a particular
application. The table below gives a guide as to which measurement mode is
ideal for which measurement.
Table 7-1. Measurement mode and relevant applications
Measurement mode
Compass mode
Clock mode
When the laser beam is centered such that the dot on the display screen is at the
center of the crosshair, the Product's right LED turns blue.
Compass mode is the default measurement mode for horizontal machines. In
this mode, measurement points are taken at any three of the eight available
sectors.
Clock measurement mode which is the default for vertical machines, is de-
scribed in chapter 9 'Vertical shaft alignment' starting on page 107.
If coupling torsion play (backlash) is suspected, turn the shaft or coupling
end where the prism is mounted. Ensure shaft is turned in the normal rotation
direction of the machine.
68
Application
Horizontal machines (standard, uncoupled
shafts, nonrotatable shafts)
Vertical machines (four feet
or flange-mounted)
Note
Note
Note
830
LASER ALIGNMENT TOOL
SETUP
MEASURE
DIAGNOSE
MENU
ABC
DEF
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
CLEAR
ENTER
space
-
+
0
.
/
.
BACK