Fluke 830 User Manual page 45

An existing file may be deleted by highlighting it using
ing . When a hint screen appears, use
CLEAR
file is deleted by pressing
To rename an existing file, use
data entry keys to edit file name and confirm changes by pressing
'Save file' – This option is used to save the current file. If the file is new and does
not yet have a name, use the data entry keys to enter the new file name in the
editing box that appears.
When entering names that contain both upper and lower case characters as
well as numerals, use
/ . *
down while observing the status indicator at the top right corner of the edit-
ing box. This displays the type of character to be entered. Empty spaces are
entered by pressing
0
to confirm file name.
Press
ENTER
When saving an already existing file, the editing box appears with the existing
name highlighted. Confirm saving by pressing
The Product stores up to 200 measurement files.
'New file' – This option is used to create a new measurement file.
'Resume' – This option toggles with 'New file' and is used to call up the last file
loaded before the instrument was switched off, depending on the resume policy
set.
Note
to confirm deletion.
ENTER
to highlight the file, then use the
/
Note
/ . *
to cycle through the three options. Press and hold
.
ENTER
Note
Configuration and data management
/ then press-
/ to highlight 'Yes'. The
.
ENTER
.
Data management
37