6
FORK, TRIPLE CLAMP
6.13.8
Checking the fork legs
Main work
–
Remove pilot bushing support
–
Remove O-ring
201799-10
Condition
The fork legs have been disassembled.
–
Check the inner tube and axle clamp for damage.
»
If there is damage:
–
Change the inner tube.
200728-10
–
Measure the outside diameter at multiple locations of the inner tube.
Outside diameter of inner tube
»
If the measured value is smaller than the specified value:
–
Change the inner tube.
200684-10
–
Measure the run-out of the inner tube.
Inner tube run-out
»
If the measured value is larger than the specified value:
–
Change the inner tube.
200685-10
–
Measure the inside diameter at multiple locations of the outer tube.
Inside diameter of outer tube
»
If the measured value is larger than the specified value:
–
Change the outer tube.
–
Check the outer tube for damage.
»
If there is damage:
–
Change the outer tube.
200632-10
.
and seal ring
.
47.975... 48.005 mm (1.88878...
1.88996 in)
≤ 0.20 mm (≤ 0.0079 in)
≤ 49.20 mm (≤ 1.937 in)
42