6
FORK, TRIPLE CLAMP
6.10
Removing the fork protector
6.11
Installing the fork protector
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
M00138-11
–
Position the brake caliper and mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
M00234-10
Finishing work
–
Install the front wheel. (
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel. (
–
Remove the fork legs. (
Main work
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector upwards.
101327-10
Main work
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protector on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
101327-10
Finishing work
–
Install the fork legs. (
–
Install the front wheel. (
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
.
.
M8
p. 103)
p. 127)
p. 103)
p. 16)
on the left fork leg. Remove the fork protector upwards.
p. 17)
p. 103)
p. 127)
M8
17 Nm
(12.5 lbf ft)
M8
15 Nm
(11.1 lbf ft)
.
Loctite
25 Nm
(18.4 lbf ft)
p. 99)
p. 98)
p. 11)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 99)
18
®
243™
.
.