KTM 350 EXC-F EU Repair Manual page 99

12 FUEL TANK, SEAT, TRIM
3 0 0 3
2 0 0 2
–
Mount special tool
Pressure testing tool (61029094000) (
–
Mount special tool
Testing hose (61029093000) (
–
Position the hose end in a fuel cannister.
Guideline
Minimum size of fuel cannister
400926-10
–
Connect the diagnostics tool and start it.
–
Select the "Function test of fuel pump control" actuator test.
Guideline
Maximum duration of the actuator test
–
Check the fuel pressure with the filler cap closed.
Fuel pressure
When the fuel pump is active
» If the specification is not reached:
–
Open the filler cap. (
–
Check the tank air vent system.
400927-01
–
Check the fuel pressure with the filler cap open.
Fuel pressure
When the fuel pump is active
» If the specification is not reached:
–
Check that the fuel line is clear.
–
Change the fuel filter. (
–
Change the fuel pump. (
–
Stop the "Function test of fuel pump control" actuator test by pressing the "Quit" but-
400928-01
ton.
–
Remove the special tools.
–
Join the fuel hose connection.

.
p. 345)

with nozzle label 0,60.
p. 345)
10 l (2.6 US gal)
3 min
3.35... 3.65 bar (48.6... 52.9 psi)
p. 88)
3.35... 3.65 bar (48.6... 52.9 psi)
p. 93)
p. 95)
97