Disassembling The Hydrostop Unit; Disassembling The Seal Ring Retainer - KTM 350 EXC-F EU Repair Manual

6 FORK, TRIPLE CLAMP
6.13.6

Disassembling the hydrostop unit

Info
The steps are identical for both fork legs.
6.13.7

Disassembling the seal ring retainer

Info
The steps are identical for both fork legs.
–
Remove valve needle
Info
The adjusting tube can be used for this.
201789-10
Preparatory work
–
Disassemble the fork legs. (
Main work
–
Mount the hydrostop unit on a fitting hexagon socket and clamp into a vice.
–
Remove sleeve
–
Remove shim stack
201780-10
–
Remove adapter
–
Remove hub
Info
It is possible that only one washer or no washer is present.
–
Remove the O-ring from the hub.
201781-10
–
Remove shim stack
–
Remove washer
–
Remove O-ring
201782-10
Preparatory work
–
Disassemble the fork legs. (
–
Remove the spring. (
–
Disassemble the cartridge. (

from the piston rod.
p. 36)
 .

.

.
 
with washers .

.

.

.
p. 36)
p. 38)
p. 39)
41