6
FORK, TRIPLE CLAMP
6.13.2
Disassembling the fork legs
Info
The steps are identical for both fork legs.
–
Disassemble the fork legs. (
–
Remove the spring. (
–
Disassemble the cartridge. (
–
Disassemble the piston rod. (
–
Disassemble the hydrostop unit. (
–
Disassemble the seal ring retainer. (
–
Check the fork legs. (
–
Assemble the seal ring retainer. (
–
Assemble the hydrostop unit. (
–
Assemble the piston rod. (
–
Assemble the cartridge. (
–
Assemble the fork legs. (
201926-01
Condition
The fork legs are disassembled.
–
Note down the current state of rebound damping
leg).
–
Note down the current state of compression damping
left fork leg).
–
Fully open the adjusters of the rebound and compression damping.
201699-10
–
Clamp the fork leg in the area of the lower triple clamp.
Clamping stand (T1403S) (
–
Remove the screw. Remove adjuster
201700-10
–
Release screw cap
Special socket (T14047) (
Info
The cartridge cannot be taken off yet.
201701-10
p. 36)
p. 38)
p. 39)
p. 40)
p. 41)
p. 41)
p. 42)
p. 43)
p. 43)
p. 44)
p. 45)
p. 46)
p. 353)
.
.
p. 353)
REB (red adjuster of right fork
COMP (white adjuster of
36