Wiring Harness, Battery; Removing The Main Fuse; Installing The Main Fuse; Changing The Fuses Of Individual Power Consumers - KTM 350 EXC-F EU Repair Manual

15

WIRING HARNESS, BATTERY

15.1

Removing the main fuse

15.2

Installing the main fuse

Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
15.3

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the air filter box lid. (
Main work
–
Remove the protection cover
Info
The main fuse
cover.
–
Remove main fuse
400270-10
Main work
–
Insert the main fuse.
Fuse (75011088010) (
Info
A reserve fuse
Replace a burned-out fuse
–
Replace the protection cover.
400273-10
Finishing work
–
Install the air filter box lid. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Open fuse box cover
M00186-10
p. 85)

.
 is located in the starter relay

.
p. 224)

is located in the starter relay.

only by an equivalent fuse.
p. 85)
p. 88)

.
111
 under the filter box