Section 1: Framing Of The Airframe - Diamond Dust CW Kit Assembly Manual

Section 1: Framing of the Airframe

Step 1
Locate all parts listed in materials list, and
take inventory of all parts. This will help you
familiarize yourself with the various
components.
Lay your print out on large flat surface ( the
larger and flatter the better). Cover your
plans with either parchment paper or wax
paper and tape them down to secure to your
work surface.
8
Step 2
Assemble the rear spar by locating the tubes
labeled "Rear Spar" and "Spar extenders".
Insert the spar extenders into each end of the
rear spar. You may have to lightly sand the
spar extenders so that they go into the rear
spar with a moderate amount of force, but
first try the opposite end of the spar extender
tube to see which end fits the best.