Additional Required Tools And Adhesives - Diamond Dust CW Kit Assembly Manual

Additional Required Tools and Adhesives

Tools
• Drill
• Drill bits: 1 /
16"
• Hobby Knife
• Razor saw or hacksaw
• #2 Phillips Screwdriver
• 120 or 240 grit sandpaper
• Sanding Block or Permagrit File
• Scissors
• 3/32" hex driver or Allen wrench
• Pliers
• Ruler or measuring tape
• Speed square or small square
• Soldering Iron
• Heat Gun
• Covering Iron
• Pencil
, 3 / 32", 7 / 64", 1 /
8"
Adhesives
• Thin CA Glue (Cyanoacrylate)
• Thick CA Glue (Cyanoacrylate)
• CA Accelerator
• CA Remover / Debonder
• Stix-It Covering Adhesive
Other Required Items
• Wax paper or Parchment paper
• Foam pad or rubber pad for fuel tank
• Epoxy Brushes
7