Introduction - Diamond Dust CW Kit Assembly Manual

Introduction

Thank you for purchasing the Diamond Dust Clipped Wing Kit high performance delta wing
aircraft. Backed by Diamond Dust's high quality reputation, the Diamond Dust CW will
provide you with the superior performance and features you are looking for in a high speed
high performance aircraft. The Diamond Dust CW features lightweight balsa, composite
tubes, and light-ply construction. This lightly loaded delta wing design makes it ideal for
extremely aggressive maneuvers as well as excellent low speed maneuverability.
Before Starting Assembly
Before beginning the assembly of your Diamond Dust CW, remove each part from the box
and the parts bag for inspection. Closely inspect the wood pieces and parts bag for damage.
If you find any damaged or missing parts, contact the place of purchase.
Using the Manual
This manual is divided into sections to help make assembly easier to understand and to
provide breaks between each major section. Remember to take your time, and follow the
directions closely. You can also check on the Diamond Dust RC website for any updates to
this manual at www.diamonddustrc.com.
Also there are a number of steps in the assembly of the Diamond Dust and Diamond Dust
Clipped Wing version that are identical. For practicality and efficiency reasons, some pictures
in this manual may show the Stock Diamond Dust in the illustrations. This should not be a
problem since the majority of the steps are identical for both aircraft. If you have any
questions, please don't hesitate to contact our tech support line at (352-871-7301)
Monday through Friday, between the hours of 8am to 6pm EST.
3