Diamond Dust CW Kit Assembly Manual page 57

Section 11: Pre-Flight & At the Flying Field – Cont.
Step 4
LANDING:
NOTE: Landings are usually done on soft grass. Dirt or sand is not recommended.
(A) Get into a high approach and shut off engine.
(B) While at high altitude slow the aircraft down by bringing it to nose high attitude and get
the feel of its low speed glide characteristics.. Be careful not to stall the aircraft.
(C) Once you have done this gently push the nose down to build up flying speed and bring it
in for the final approach being careful not to build up too much speed.
(D) Make a final slow down by gently flaring the aircraft.
(E) Hold your flare and the aircraft will settle in very controlled on the belly of aircraft.
57