Warranty Information - Diamond Dust CW Kit Assembly Manual

Warranty Information

Tetracam, Inc. and Diamond Dust RC, guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty does not cover any
component parts damaged by use or modification. In no case shall the liability to Tetracam,
Inc. exceed the original cost of the purchased kit. Further, Tetracam, Inc. reserves the right
to change or modify this warranty without notice.
In that Tetracam, Inc. and Diamond Dust RC have no control over the final assembly or
materials used for the final assembly, no liability shall be assumed nor accepted for any
damage resulting from the
use of the final assembled product . By the act of using the assembled product, the user
accepts all resulting liability. Please note that once assembly of the model has been
started, you must contact Tetracam, Inc. directly regarding any warranty questions. Please
do not contact your local hobby shop regarding warranty issues, even if that is where you
purchased it. This will enable Tetracam, Inc. to better answer your questions and service you
in the event that you may need any assistance. If the buyer is not prepared to accept the
liability associated with the use of this product, the buyer is advised to return this
kit immediately in new and unused condition to the place of purchase.
Warning
An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to
property. Fly only in open areas, perferably at AMA (Academy of Model Aeronautics)
approved flying sites, following all instructions included with your radio and equipment.
Tetracam, Inc
Devonshire St.
Suite 310
Chatsworth, CA 91311
Sales - (818) 718 -2119
Tech Support – (352) 871-7301
www.tetracam.com
4