Section 9: Final Inspection/Control Throws - Diamond Dust CW Kit Assembly Manual

Section 9: Final Inspection/Control Throws

Step 1
Control Throws:
Give the aircraft a complete check over and
make sure the airframe and all control
surfaces are straight.
Also make sure that with up and down
elevator your elevons stay equal through
their range of motion.
Start out with 1" up & 1" down of travel with
both elevator & ailerons. Later, you can
increase the travel on the elevator until it
starts to stall for high rate. You can also
adjust the aileron throws, until they reach full
deflection.
We recommend that you use 100% expo on
your ailerons and 25% on your elevator for
the test flight.
Low Rate
Elevator 3/8"
up
3/8"
down
Aileron 3/8"
up
3/8"
down
54
High Rate
Make sure that you have the proper direction
¾"
up
in relation to your radio stick moves.
¾"
down
Max Throw
up
Max Throw
down