Establishing Connections; Main Power; Connecting The Network Cable; Picture 3: Connectors On Backside - Image Access Bookeye Color Operation Manual

5 Establishing Connections

Important: Before connecting the BOOKEYE
check the following items:
The wall outlet is in perfect condition and properly grounded.
The power cable is undamaged.
The wall outlet is equipped with a correctly dimensioned fuse.
Turn the device off before plugging or unplugging any cable.
Connect the wall outlet and the power supply connector at the BOOKEYE
power cable.
5.1

Main Power

The power connector and the main power switch are located at the right side of the back
of the document bed.
After the main power switch is turned on the green START LED above the START button
lights up.
This indicates that the BOOKEYE
5.2

Connecting the Network Cable

®
The BOOKEYE Color scanner is delivered with a cross-over cable (green cable
connectors) and a network cable.
The network connector is located at the back side of the document bed.
Use the cross-over cable in order to connect the BOOKEYE
PC via a network card.
Use the network cable in order to connect the BOOKEYE
Page 14
®

Picture 3: Connectors on backside

®
Color is ready-to-use.
Color scanner to the mains voltage,
®
Color scanner directly to a
®
Color scanner to a network.
®
Color with the
Operation Manual