Install - Image Access Bookeye Color Operation Manual

13.2 Install

1. Start the BOOKEYE Color scanner.
2. When the start screen appears, click the Setup Device button.
3. Choose the login level Poweruser.
4. Login with user name "Poweruser" and password "Poweruser".
5. Find the section Updates & Uploads. Click the Update Firmware" Button.
6. Use the Browse button for selecting the update archive "s2nfirm-x.yyz.zip".
7. Press the send file button.
8. Wait for approx. 30 to 40 seconds until the update is complete. The scanner then will
switch off itself automatically.
9. Restart the BOOKEYE Color scanner.
10. After a firmware update, some device parameters must be calibrated again. Perform
the necessary steps for the calibration before scanning again.
Chapter 14 describes the calibration steps.
Page 62 Operation Manual