Scan2Net Firmware Setup Procedure; How To Enter The "Poweruser" Level; Picture 50: "Setup Device" Screen - Image Access Bookeye Color Operation Manual

14 Scan2Net Firmware Setup Procedure

Valid with Firmware V3.xx or higher.
After a firmware update, the four menu items described in the following should be
performed before starting to scan.
The menu items for the setup procedure are accessible in the login level "Poweruser".

14.1 How to enter the "Poweruser" level

1. Start your S2N Scan2Net Scanner.
2. Start your browser and enter the IP address of the scanner.
3. Press the Setup device button.
4. Choose the login level Poweruser .

Picture 50: "Setup Device" screen

5. Login with user name "Poweruser" and password "Poweruser".
Operation Manual Page 63