Keyboard; Picture 5: Keyboard Bookeye Color - Image Access Bookeye Color Operation Manual

7 Keyboard

The keyboard is laid out in seven function fields. At each function field, upward/downward
buttons are used to select the desired setting.
The selected setting is displayed by LEDs at each function field.
The START button and the STOP button control several functions. The function of these
buttons is defined by the mode of operation of the BOOKEYE
®
The BOOKEYE Color has two modes of operation.
—
Scan mode:
—
Set-up mode:
Page 18

Picture 5: Keyboard BOOKEYE Color

In this mode of operation the BOOKEYE
function fields or by the integrated user interface.
Pressing the START button starts the scan sequence with the
defined parameters. During the scan sequence the display shows
the current status.
A brief push of the STOP button interrupts the scan sequence. All
scanned data is lost.
Pressing the STOP button for at least three seconds switches the
®
BOOKEYE Color off. While switching off, the red LED blinks.
During this time the display shows the current status.
At the end of the shutdown sequence, the green LED above the
START button lights up. The BOOKEYE
mode.
In this mode of operation all specific device parameters of the
®
BOOKEYE Color are set.
For this purpose, five function fields of the keyboard are used.
Detailed information about the setting of device parameters can be
found in chapter 8.
®
Color.
®
Color is controlled by the
®
Color now is in stand-by
Operation Manual