Picture 25: Prescan In Udf Screen - Image Access Bookeye Color Operation Manual

After clicking the Preview button, a preview of the whole scan area will replace the
template. The red dashed line rectangle will now visualize the selected scan area.

Picture 25: Prescan in UDF screen

At the left side of the schematic scan area the numeric controls are arranged.
The value for the Zero Offset defines the shifting to the right or to the left starting from the
middle of the lower edge of the document bed.. The + button increments the shown value
by 1, the – button decrements the shown value by 1. Any change of the set value will
change the size of the red dashed line in the schematic scan area.
The value for the Bottom Border defines the vertical shifting of the scanned area from
the lower edge. The + button increments the shown value by 1, the – button decrements
the shown value by 1. Any change of the set value will change the size of the red dashed
line in the schematic scan area.
The value for the Width defines the horizontal width of the scanned area starting from the
left edge of the red dashed rectangle. The + button increments the shown value by 1,
the – button decrements the shown value by 1. Any change of the set value will change
the size of the red dashed line in the schematic scan area.
The value for the Height defines the vertical height of the scanned area starting from the
bottom edge of the red dashed rectangle. The + button increments the shown value by 1,
the – button decrements the shown value by 1. Any change of the set value will change
the size of the red dashed line in the schematic scan area.
Operation Manual Page 37