User Defined Format, No Java; Picture 24: User Defined Formats Screen - Image Access Bookeye Color Operation Manual

9.2.1

User defined Format, no JAVA

The size of the user defined formats can be specified in two ways.
1. If no JAVA Plug-In is installed, the size and the position of the scan area can be
defined via numerical values.
2. If the option Use Java UDF in the
the user defined scan area are defined via a rectangle drawn with the mouse.
In the middle of the selection window, the whole scan area is represented with a blue
template. The size of the user defined scan area is shown with a red dashed line
rectangle.
The position marked with
document bed.
At the lower left corner, the maximum value of the scan area to the left direction is shown.
At the lower right corner, the corresponding maximum value in the right direction is shown.
At the upper right corner, the maximum height value of the scan area is shown.
The unit of the maximum values shown depends on the
scan area. Valid choices are:
•
mil (1/1000 Inch)
•
inch
•
cm
•
mm
•
pixels.
Page 36
Settings
User defined formats
Picture 24:
0 (zero) corresponds to the middle of the lower edge of the
menu is activated, the size and position of
screen
unit control left of the schematic
Operation Manual