Owners manual
7. Front Wheels
7.1 Front wheels installation
To change the wheels, simply follow these instructions:
1.
Determine the front wheel position on the fork. Refer to section 5.
Insert screw A in the corresponding hole with both spacers B between the
2.
wheel and fork on each side.
3.
Put bolt C at the end of screw A and tighten with two 13 mm wrenches.
The modification of a wheel of 1" for a wheel of 2 ", or vice versa, requires the
acquisition of an adapted fork for each case.
This step is required when a front wheel position or seat height has been changed.
It will help to always have a straight line, therefore easier propulsion. Please refer
to section 5.
Once tightened, the wheel must turn easily
A
B
Figure 18 : Front wheel installation
19
C
B
ENGLISH
Revision 3
Janvier 2015