Height Adjustment; Angle Adjustment - Physipro NEOX Tilt-in-Space Owner's Manual

Owners manual

12.2 Height adjustment

Remove screw B using a 10 mm wrench;
1.
2. Slide footrest extension up or down inside the frame tube to the desired
height;
Replace screw A, tighten.
3.

12.3 Angle adjustment

1. To raise legrest, hold the lower part of the footrest while pulling it up ;
To lower the leg angle, press the lever C while holding the user's leg to the
2.
desired angle.
Figure 46 : Articulated Legrest Height Adjustment
Figure 47 : Articulating Legrest Angle Adjustment
35
ENGLISH
Revision 3
Janvier 2015