Negative Tilt - Physipro NEOX Tilt-in-Space Owner's Manual

ENGLISH

9.2 Negative Tilt

To facilitate transfer, the NEOX™ can be tilted forward, in a negative tilt, please
follow these steps to do so:
Activate the wheel lock H (Figure 24) before positioning the NEOX™ in a
1.
negative tilt. The tilt Ө can vary according to the seat to floor height and
the rear wheels position.
2. By default, the upright position is 0°. To obtain a negative tilt, move the
adjustment block D and the gas cylinder G forward (figure 23-b).
Position the NEOX™ in a positive tilt and then unscrew bolts E and F using
3.
a 4 mm Allen key and a 10 mm wrench.
To obtain a negative tilt, move the adjustment block D and the gas
4.
cylinder G toward the holes for the negative tilt (figure 23-b).
Replace screw E and F, tighten.
5.
Figure 24 : Fonctionnement de la bascule négative
H
Figure 37: Negative Tilt
30
NEOX™ Tilt-in-Space
Ref. Ө