Physipro NEOX Tilt-in-Space Owner's Manual page 46

ENGLISH
Adjustment sequence
In order to properly adjust the NEOX Tilt-in-Space, the following sequence should be applied:
• Adjust the seat width according to order form
• Adjust the seat depth according to order form and reference table
• Adjust the center of mass according to reference table
• Adjust gas cylinder according to reference table
• Adjust seat to floor height according to order form
• If required, limit the tilt/recline according to reference table
Seat depth adjustment
Adjust the seat depth according to Table 1. This table consider that the interface between
the back and the patient is as define on the Figure 1. A thicker cushion or recessed back will
change the adjustment.
Table 1: Back position and hanger position versus seat depth
Back / patient
Backrest/patient
Interface
interface
Figure 1: Seat depth adjustment--standard model
46
NEOX™ Tilt-in-Space