Physipro NEOX Tilt-in-Space Owner's Manual page 49

Owners manual
ENGLISH
Table 4: Maximum tilt/recline for 10 degree minimum stability in least stable
configuration.
Overall width and tilt limitation
Overall width
The overall width of the Neox without pushrim is establish by the following
Overall width=seat width+9.5 inches
For larger seat width, this overall width may not be acceptable. That's why the Neox has free
extension plates that can be installed between the seat frame and the tilting mechanism. The
purpose of the plates is to have the wheels underneath the armrest (compare to outside, see
Figure 6 and Figure 7) to minimise the overall width and get a better pushing efficiency. With
these plates the overall width is reduced by 2 inches. By default, these plates are installed at
the manufacture for seat width of 19 inches and over.
Figure 6: Neox standard Figure 7: Neox with extension plates
The addition of pushrim will add another 1.5 inches to the overall width. Table 5 on page 50
shows a summary of the overall width.
Revision 3
Janvier 2015
49