Back Cane Height Adjustment - Physipro NEOX Tilt-in-Space Owner's Manual

Owners manual
7. Install the bottom part of the dynamic back post by re-inserting the two
sleeves E;
Re-install bolts J and armrest hardware;
8.
9. Re-install back post and backrest;
10. Replace armrest and rear wheels.
Figure 23 : Dynamic Backrest Installation
8.3 Back posts height modification
Adjustable or swing away back posts are available
in 3 different sizes.
It can be adjusted by 13" to 16", 17" to 21" or 22" to
26".
To modify the height, follow these steps:
Remove screw A with a 10 mm wrench.
1.
2. To get the desired height, pull the back posts
up or down as needed.
Replace screw A, tighten
3.
Figure 24 : Dynamic Backrest Installation
Figure 25 : Back posts Height Modification
23
ENGLISH
Revision 3
Janvier 2015