Depth And Width Adjustments; Seat Depth Modification - Physipro NEOX Tilt-in-Space Owner's Manual

Owners manual

4. Depth and Width adjustments

4.1 Seat depth modification

The NEOX™ seat depth can be modified by moving the backrest canes. All seat
depths ordered allow for an increase or decrease of the depth by 1". Please
note that a 14" seat depth only increases by 2" and a seat 22" only decreases
by 2".
Follow these steps to modify the depth:
1. Using a 4 mm and 10 mm Allen Key, unscrew bolt A, B and C;
2. Using a flat punch, remove the sleeves; (figure 7-b);
3. Move the back posts backward or forward to get the desired depth;
4. Replace sleeves, bolts and armrest
hardware, tighten.
tighten bolts A to avoid blocking the armrest
hardware pivot.)
Figure 7-b : Seat Depth Modification
It is also necessary to follow these steps,
if you changed the seat depth:
1. Using 2 wrenches at 10 mm,
unscrew screw D and E;
2. Move the back posts backward or
forward to get the desired depth;
3. You can adjust the legrest depth at
the same time;
4. Replace the screws, tighten.
Modify the seat depth will affect the center of mass location. Please refer to
appendix A for proper configuration.
(Warning - Do not over
B
A
11
C
Armrest hardware
Figure 7 : Seat Depth Modification
Adjustable legrest
Figure 8 : Seat depth modification
ENGLISH
Revision 3
Janvier 2015