ENGLISH
10. Armrests
10.1 Armrests Type «U»
11.1.1 Flipping Armrest Back
Depress the release latch A
1.
2.
Pull the armrest toward back of wheelchair
11.1.2 Armrest Height Adjustment
1.
Push the release latch B;
Slide arm pad C up or down to the
2.
desired height;
3.
When the desired height is reached,
release latch B making sure the armrest
is properly anchored in the right adjustment hole
After any adjustments, make sure all attaching hardware is tightened
securely – otherwise injury or damage may occur.
Always lift the wheelchair by gripping the frame. Never lift the wheelchair
by the removable armrests or the footrests.
11. Footrests
11.1 Swing-in/swing-out footrests
1.
Place the footrest into the receiver on front
frame tube with the footrest facing outward
from the frame;
2.
Rotate the footrest inward until it locks into
place on locking bolt;
To swing-out, press handle A to unlock the
3.
footrest and rotate outward.
32
NEOX™ Tilt-in-Space
Figure 40 :Type "U in Armrest
Figure 41 : Swing-out Footrests