ENGLISH
6. Rear Wheels
6.1 Fixed Axle Installation / Removal
6.1.1 To Install Fixed axle rear wheel
Insert axle A in the wheel.
1.
Slide axle A inside the positioning device B.
2.
Put nut C at the end of the axle A.
3.
Tighten nut C with a 3/4" wrench while holding the axle A with
4.
a ¾" ratchet.
A
20", 22" or 24" rear wheels installation requires re-adjusting the location
of the wheel locks, the front wheels and the anti-tippers. See section 5.3,
12.1 and 13.2.
Always check the steadiness of the wheelchair. It may require rear wheel
horizontal adjustment. Read section 6.3.
B
Figure 14 : Fixed axle Rear Wheels Installation
18
XL5 / XL5 CI wheelchair
C