Owners manual
9. Tilt-in-Space
9.1 Positive Tilt
The Neox™ can be tilted backward, in a positive tilt, please follow these steps
to do so:
Activate the wheel lock B before positioning the NEOX™ in a positive tilt.
1.
(Figure 21). Refer to section 14.3;
Tilt the NEOX™ by simultaneously pressing the 2 handles A;
2.
3.
Release the handles to the desired tilt;
If needed, the maximum positive tilt can be limited by a locking collar C
4.
installed on the interior part of the cylinder (see next page);
5.
The tilt in a straightened position can, meanwhile, be controlled by an
adjustment block D (figure 39-a). The angle can be adjusted at 0 °, 5 ° or
10° (figure 39-b).
Consult Appendix A for tilt limitations.
A
Figure 36 : Operation of the Positive Tilt
B
29
ENGLISH
Revision 3
Janvier 2015